WANSVIEW DVR.WEBCAM LICENSE KEY
WANSVIEW DVR.WEBCAM INSTALL
WANSVIEW DVR.WEBCAM MANUAL
WANSVIEW DVR.WEBCAM SOFTWARE
WANSVIEW DVR.WEBCAM PASSWORD

You also need to select an alarm interval. You need to check Motion Detect Armed, set motion sensitivity and Alarm Arming Time (set the schedule, usually 'Select all'. If you ordered a motion triggered image recording plan, then you should configure Alarm Service Settings to upload images to FTP server. After that, you need to configure the video / image resolution. Same as the camera name that you created on websiteĬlick Submit to save the settings. Otherwise, you can use USERNAME:Dfoldername as the username.

WANSVIEW DVR.WEBCAM LICENSE KEY

If you use the camera license key as the password, you must add a camera from first, then assign a license key to the newly created camera.

WANSVIEW DVR.WEBCAM PASSWORD

You can use the camera license key as the password otherwise, you need to change the username to: USERNAME:Dfoldername So FTP path info must be provided in the username or license key.

FTP Path: This camera does not support FTP Path.

FTP Mode: PASV (This camera uses PASV by default.

When the trialĮnds, you will need to order a subscription to continue using the service.Īssuming you already have a CameraFTP Account, then you need to enter the following info: If Wi-Fi is configured successfully, you can unplug your network cable later.Ĭlick FTP Service Settings, you can enter the FTP information as shown in the screenshot below. The wireless password, after done, click Save. Otherwise, click 'Wireless Lan Settings', you will see the screen below.Ĭlick Scan to find all available Wi-Fi routers, then select a router to connect. If you had already connected the camera with your wireless router, then skip this step. These steps in the Camera Configuration screen to make sure everything is configured correctly). With CameraFTP's service, most regular setup steps are not required.

WANSVIEW DVR.WEBCAM INSTALL

(It is recommendedĪfter you log on to the camera, please install the Plug-in:Ĭlick 'Sign in', it will display the live view screen:Ĭlick Setup, you will see the Setup Main screen. The default username is admin, and password is admin. So please download Firefox web browser if you don't have it already. Most IP cameras don't support Chrome, incl. Step 2: Configure the Camera Using the Web-based New model cameras probably have supported ONVIF. )įor CameraFTP VSS to locate this camera, you must manually enter the port number 99. You can use VSS as a cloud-enabled NVR, which requires a PC. Note: This camera is compatible with VSS-based Cloud Recording. ( After you find the camera's IP address, you can stop / uninstall VSS.

WANSVIEW DVR.WEBCAM SOFTWARE

If your computerĭoes not have a DVD/CD drive, then you can download CameraFTP VSS software to find the camera's IP address. Usually you will run the included IP Camera Search Tool to find the camera.

WANSVIEW DVR.WEBCAM MANUAL

Please refer to the manufacturer’s manual for more detailed information. Please read the product manual for detailed instructions. Otherwise, there are several ways to connect the IPĬamera to your Wi-Fi network. If you want to use wired connection, you just need to connect the Ethernet cable. To the network and find IP address 1.1 Connect camera to the network If you have finished these basic steps before, Manufacturer for all camera-related issues and contact us only forĬameraFTP-related (cloud service / FTP) issues. It may not be accurate or completely up-to-date. The information provided isīased on our knowledge of the models Wanscam JW0004 Cameras. Replace the product manual from the manufacturer. IR LEDs for Night Vision Up to 30 feet distance for 24-hour surveillanceīasic camera information Video / image resolution.Does not support H.264 video/audio recording by itself, but can be supported via CameraFTP VSS.Continuous image recording to FTP server at a max frequency of 1 image/s.Motion detection with cloud image recording to FTP server.Easy WiFi Configuration via a network cable and web browser.Supports both wired and wireless connection, but not PoE.Two-way audio, Remote Pan/ Tilt rotate, indoor use.Supports 640x480 video resolution with up to 30 fps.Newer models might have added H.264 video recording feature. The camera model JW0004 that we tested is a little old and can only support 640x480 image recording. In general, we believe Wansview is better suited for cloud recording than Wanscam. Please note Wanscam is different from Wansview. Wanscam network cameras are usually compatible with CameraFTP cloud recording service. Configure Video Profile and Image/Video Recording OptionsĤ.1 Configure Video / Image Settings (Resolution, Frame Rate, Bit Rate) Step 2: Configure the Camera Using the Web-based Configuration Tool Step 1: Connect camera to the network and find IP address Camera for Cloud Recording, Monitoring and Playback

Wansview dvr.webcam